AirPod 1st Gen Case Silicone Mold
AirPod 1st Gen Case Silicone Mold
AirPod 1st Gen Case Silicone Mold

AirPod 1st Gen Case Silicone Mold

Regular price
$45.00
Sale price
$45.00
Shipping calculated at checkout.

PLEASE READ

 

PLEASE SCROLL ALL THE WAY TO THE BOTTOM AND MAKE SURE YOU READ THE NOTES.

 

This mold is made from soft, tear resistant, very low long term shrinkage silicone. It is great or casting wax, gypsum, resins, concrete and other materials and is heat resistant up to 450°F.

it is designed to fit the AirPods Pro Case

The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold can be gently cleaned with a soap solution and rinsed with water. Rubbing the mold repeatedly or with things such as fabric and paper towels  can cause scratches to the shine which will cause imperfections in the details. Molds should be stored on a level surface in a cool, dry environment. 

 

HEAT

Most artists apply heat to pop bubbles in resin once it has been poured, doing this can be harmful to your silicone mold. It can and WILL burn the resin and can damage  the mold as well. The resin can burn and fuse to the silicone and if the silicone is damaged, it will cause imperfections in the finished product or cause the heated resin to stick to the silicone mold, damaging the mold itself.  If you want to pop the bubbles do so with a torch or heat gun before putting it into the mold. 

All molds are made to order, brand new and never used.  Once orders are placed, it takes 7-10 business days to process. 

Please inspect mold prior to use. Molds are NON returnable/refundable once used. If Mold is damaged prior to use, it may be returned and I will inspect it.  If it is determined that it was a defect prior to shipping, mold will be replaced or refunded (minus shipping costs).

****Little Sticky Tabs will be needed inside the case to hold the case onto the Aipods. Because the cases will be made out of resin, resin is not “sticky” like silicone. The bottom of the case fits very well without using sticky tabs, but the top of the case will need to have sticky tabs applied in order for it to stay on. I include a little loop tab mold  with the mold so you have the option to add a Keychain loop after the product is demolded.  Below is a link for the little glue tabs I use on the inside of my cases when sending them to customers. 

Check out this Idea List on Amazon: Glue Tabs for AirPod Cases by Nicky Boyd https://www.amazon.com/shop/jusscraftinaround?listId=200ZFAWQ351H2&ref=idea_share_inf